Home page

A283 Carbon Steel Plate

ASTM A283 is a standard specification for low and intermediate tensile strength carbon steel plates of structural quality for general application. It covers four grades (A, B, C, D) with incrementally higher minimum yield and tensile strength requirements. Q195 is a comparable Chinese standard (GB/T 700) grade, often supplied as an equivalent.

Classification :

Carbon steel plate

WhatsApp : +8618678909652

E-mail : nanmusen@nanmusen.com

PRODUCT DETAILS

Name: A283 Carbon Steel Plate
Brand: Nanmusen
Availability: InStock

A283/Q195 Carbon Steel Plate Description

Product Overview
ASTM A283 is a standard specification for low and intermediate tensile strength carbon steel plates of structural quality for general application. It covers four grades (A, B, C, D) with incrementally higher minimum yield and tensile strength requirements. Q195 is a comparable Chinese standard (GB/T 700) grade, often supplied as an equivalent.

Key Features

Material Type: Low-carbon mild steel

Primary Characteristic: Good weldability, formability, and machinability

Common State: Typically supplied in the hot-rolled, as-rolled condition

Main Application: General structural components, building frames, platforms, truck parts, and machinery where high strength is not the primary requirement.

Product Parameters

Parameter	Specification
Product Name	ASTM A283 / Q195 Structural Steel Plate
Standard Grades	A283 Grade A, B, C, D / Q195 (GB)
Production Process	Hot Rolling (Primary)
Applicable Standards	ASTM A283, ASME SA283, GB/T 700, etc.
Thickness Range	3 mm – 150 mm (Common industrial range)
Width Range	1000 mm – 3000 mm
Length Range	1000 mm – 12000 mm (or Customized)
Delivery Condition	As-Rolled, Annealed
Surface Finish	Mill Scale , Pickled , Shot Blasted

Chemical Composition (ASTM A283, %)

Grade	C max.	Mn max.	P max.	S max.	Si (for thickness ≤ 1/2 in.)	Si (for thickness > 1/2 in.)	Cu min. (when specified)
A	0.14	0.90	0.035	0.04	0.40	0.15-0.40	0.20
B	0.17	0.90	0.035	0.04	0.40	0.15-0.40	0.20
C	0.24	0.90	0.035	0.04	0.40	0.15-0.40	0.20
D	0.27	0.90	0.035	0.04	0.40	0.15-0.40	0.20

echanical Properties (ASTM A283)

Grade	Tensile Strength	Yield Strength (min.)	Elongation (min. %)*
	psi	MPa	psi	MPa	in 8 in.	in 2 in.
A	45,000 - 60,000	310 - 415	24,000	165	27	30
B	50,000 - 65,000	345 - 450	27,000	185	25	28
C	55,000 - 75,000	380 - 515	30,000	205	22	25
D	60,000 - 80,000	415 - 550	33,000	230	20	23

Physical Properties

Property	Metric	Imperial
Density	7.85 g/cm³	0.284 lb/in³
Modulus of Elasticity	~200 GPa	~29,000 ksi

Scope of Application

ASTM A283 steel plate is a kind of low carbon steel with high strength and good formability. It is easy to process and manufacture, and can be safely welded by various welding methods. ASTM A283 steel plate is a structural carbon steel plate used for low or medium tensile strength applications. ASTM A283 steel plate is used in the manufacture of riveted, bolted and welded structures for storage tanks and cryogenic control vessels, bridges and buildings, including prefabricated buildings, warehouses and industrial commercial structures.

PACKAGING AND DELIVERY

We specialize in stainless steel plate, coil, pipe, bar, and nickel-based alloys, exporting to the USA, Germany, India, and over 50 countries worldwide with a professional foreign trade team.

FACTORY WORKSHOP

Factory workshop

APPLICATION FIELD

Chemical Storage

Automobile Manufacturing

Precision Equipment

Pipeline Transportation

Steel Structure

Highway

Aerospace

Ship Manufacturing

Offshore Platform

FAQ

Q: If products do not comply with the contract demands, what will you do?

A: We will compensate the customer for all the loss without any hesitation.

Q: It's my first time importing steel products, can you help me with it?

A: We will do our best to give the solution and help you with the business.

Q: Can you offer free samples?

A: We will return the sample fee once getting the mass production order.

Q: What is the delivery time?

A: Fast delivery in 5 days, up to order quantity.

Q: What are your terms of payment?

A: 30% T/T in advance, balance before loading, or LC at sight.

Q: Do you provide custom-made Products service?

A: Yes, custom-made is acceptable.

RELATED PRODUCTS

Stainless Steel Channel

Stainless steel channel is a corrosion-resistant structural profile with a C-shaped cross-section. It combines the high strength and easy framing capabilities of the channel design with the durability, hygiene, and aesthetic appeal of stainless steel, making it the ideal choice for applications where longevity, cleanability, and resistance to harsh environments are paramount. Classification: Channel Steel

DC01 Galvanized Sheet

DC01 galvanized sheet, also available as cut sheet and plate, is cold rolled low carbon steel substrate conforming to EN10130, with hot-dip galvanized coating on surface. It combines the good stamping performance of DC01 base steel and excellent anti-corrosion property of zinc layer. It has good ductility, flat surface, reliable weldability and easy machining, suitable for bending, punching and shallow drawing. It is widely used for sheet metal housings, hardware fittings, electrical cabinets, construction accessories and general anti-rust structural parts.

SS400 Carbon Steel Coil

SS400 according to material grade and name defined in the JIS G 3101 standard, The first S stands for "Steel", the second S stands for "Structure", and 400 for the lower limit tensile strength of 400 MPa. Ordinary structural steel with a tensile strength of 400 Mpa.This steel is the most widely used in JIS standard. Its use covers structures such as bridges, ships, vehicles, etc., in the shape of steel plates, steel bars and sections, almost all auxiliary materials for machinery and structures are used.

X42 Carbon Steel Pipe

API 5L X42 line pipe and API 5L X52 line pipe (Seamless and welded pipe) of all grades have PSL1 and PSL2 two product specifications, they are different on chemical composition, manufacturing processes, mechanical strength, heat treatment, test records, traceability etc. Actually, X42 and X52 etc. denote the minimum yield strength of the pipe steel. X42 has the minimum yield strength of 42 kilopound/square inch and X52 has the 52 ksi.

PPGI DC01

Prepainted galvanized steel coil is a kind of colour coated steel coil (PPGI coil). It uses galvanized steel as the base metal. The zinc layer offers strong corrosion resistance. Plus with painting, it is more durable than galvanized steel.The metallic coated steel then experiences some cleaning procedures, pre-treatment solutions and ultimately gets multiple layers of organic coatings, including laminates, vinyl dispersions, and paint. This continuous technique of applying different coatings is referred to as coil coating. Therefore, the steel coil doesnt require painting or finishing when employed in finished products.

AH36 Carbon Steel Plate

AH36 is a high-strength shipbuilding steel plate, one of the most common grades used in marine and offshore structural applications. It is strong, tough, and offers good weldability and formability to meet the demands of ship construction. As a grade that requires classification society certification (e.g., ABS, LR, DNV), it is important to know its key attributes, which include a minimum yield strength of 355 MPa (51 ksi) and guaranteed impact toughness at low temperatures.

ST42 Carbon steel pipe

The tensile strength of ST42 Carbon Steel Pipe shall not be less than 42kgf/mm2, which is 420MPa.ST42 Carbon Steel Pipe is a German standard seamless steel pipe, which is widely used. German standard seamless steel pipes for general purposes are rolled from ordinary carbon structural steel, low alloy structural steel or alloy structural steel, with the largest output, and are mainly used as pipes or structural parts for fluid transportation .

1020 Carbon Steel Coil

1020 carbon steel is a commonly used plain carbon steel. It has a good combination of strength and ductility and can be hardened or carburized.1020 carbon steel which contains 0.12 to 2% carbon. This steel category gains hardness and strength with heat treatment when the percentage of carbon content increases but the ductility is reduced.

GET A FREE QUOTE