PRODUCT CENTER
7075 aluminum alloy is a cold - treated forging alloy, high strength, far better than mild steel.
7075 is one of the strongest alloys commercially available.
Under heat treatment, can achieve very high strength characteristics.
The alloy also has good mechanical properties and anode reaction.
Aluminum is a silver-white light metal, relatively soft, density 2.7g/cm3, melting point 660.4℃, boiling point 2467℃, aluminum and aluminum alloys have many excellent physical properties, has been very widely used.
7075 is one of the strongest alloys commercially available.
Under heat treatment, can achieve very high strength characteristics.
The alloy also has good mechanical properties and anode reaction.
Aluminum is a silver-white light metal, relatively soft, density 2.7g/cm3, melting point 660.4℃, boiling point 2467℃, aluminum and aluminum alloys have many excellent physical properties, has been very widely used.
6061 is a common duralumin with good machinability and moderate strength.
6061 is a heat-treatable alloy with good formability, weldability, machinability, and moderate strength.
It can still maintain good operation after annealing.
If there is a certain amount of manganese and chromium, the bad effect of iron can be neutralized.
6061 is a heat-treatable alloy with good formability, weldability, machinability, and moderate strength.
It can still maintain good operation after annealing.
If there is a certain amount of manganese and chromium, the bad effect of iron can be neutralized.
Thickness 0.1-400mm，etc
Length:100-12000mm，or as required
Width:20-3000mm，etc
Standard:ASTM，AISI，JIS，GB， DIN，EN
Certification:ISO, SGS，BV
Length:100-12000mm，or as required
Width:20-3000mm，etc
Standard:ASTM，AISI，JIS，GB， DIN，EN
Certification:ISO, SGS，BV
The main alloying elements in 6161 alloy are magnesium and silicon, which provide moderate strength, good corrosion resistance, weldability, and oxidation resistance. It is widely used in various industrial structural parts requiring certain strength and high corrosion resistance. Its typical chemical composition is: Cu: 0.15–0.4%; Si: 0.4–0.8%; Fe: ≤0.7%; Mn: 0.15%; Mg: 0.8–1.2%; Zn: ≤0.25%; Cr: 0.04–0.35%; Ti: ≤0.15%. The difference between T6 and T651 tempers for 6161 aluminum plate is that T6 typically retains higher internal stress and may deform during machining, while T651—achieved by stretching after T6 treatment—effectively relieves internal stress, making it more suitable for precision machining.
2024-T3aluminum alloy can be significantly improved after heat treatment.
2024 is a typical duralumin alloy in the aluminum-copper-magnesium system.
It is a heat-treatable alloy with high strength, easy to work, easy to turn, and moderate corrosion resistance.
Main applications: aircraft structure, rivets, truck wheels, propeller components and other structural parts.
2024 is a typical duralumin alloy in the aluminum-copper-magnesium system.
It is a heat-treatable alloy with high strength, easy to work, easy to turn, and moderate corrosion resistance.
Main applications: aircraft structure, rivets, truck wheels, propeller components and other structural parts.
6082 is a heat-treatable alloy with good formability, weldability, machinability and corrosion resistance.
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
This alloyhas similar but not identical mechanical properties to alloy 6061, and its -T6 state has higher mechanical properties.
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
This alloyhas similar but not identical mechanical properties to alloy 6061, and its -T6 state has higher mechanical properties.
Thickness 0.1-400mm，etc
Length:100-12000mm，or as required
Width:20-3000mm，etc
Standard:ASTM，AISI，JIS，GB， DIN，EN
Certification:ISO, SGS，BV
Length:100-12000mm，or as required
Width:20-3000mm，etc
Standard:ASTM，AISI，JIS，GB， DIN，EN
Certification:ISO, SGS，BV
Aluminum Sheet Metal Alloy Plate Model Number 2024 6061 6063 6082 7075
Production Standard: ASTM, B209, JIS H4000-2006,GB/T2040-2012,etc
Material：1000 2000 3000 4000 5000 6000 7000 8000
Width:50mm-2500mm or as the customer’s request
Longth:50mm-8000mm or as the customer’s request
Thickness:0.12mm-260mm
Material：1000 2000 3000 4000 5000 6000 7000 8000
Width:50mm-2500mm or as the customer’s request
Longth:50mm-8000mm or as the customer’s request
Thickness:0.12mm-260mm
Alloys: 1050/1060/1100/3003/3004/5005/5052/5083/3005/8011
MOQ: 2 Tons. Regular Delivery Time: 10-15 days.
Aluminum discs are widely used in electronics, daily chemicals, culture and education, insulation, machinery manufacturing, automotive, aerospace, military, mold, construction, printing and other industries.
MOQ: 2 Tons. Regular Delivery Time: 10-15 days.
Aluminum discs are widely used in electronics, daily chemicals, culture and education, insulation, machinery manufacturing, automotive, aerospace, military, mold, construction, printing and other industries.
CONTACT US
Xingguang Financial Center, Liaocheng City, Shandong Province
GET A FREE QUOTE