PRODUCT CENTER
Use of 2205 stainless steel coil: 1. The heater is generally used in the oil refining unit; 2. Chemical plant equipment pipeline; 3. Fast cooling cylinder for solid solution used in textile industry; 4. Seamless steel pipe for heat exchanger and condenser. 5. High pressure seamless steel pipe for food (gb-2000) is a high-quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipes with working temperature of - 40~400 ° C and working pressure of 10~30ma. 6. Seamless steel pipes for geological drilling and oil drilling control. 7. Cracking pipe for petrochemical industry is used to transport high-temperature and high-pressure fluid on fertilizer equipment.
Application: Used as Walls Structural Retainers and Screen Pipes for Oil, Gas and Water Wells
Specification: OD: 50mm - 500mm;WT: less than 20mm;LENGTH: less than 15m
Slot&Holes Specification: as customer require
Standard & Grade: API , API5CT J55/K55/N80/C75/L80/C90/T95/Q125
Process Type: Seamless (SMLS), Electric Resistance Welded (ERW)
End: Plain, Beveled, Square Cut, With LTC/STC/BTC Connection
Surface: Anti-corrosion&water Painting
Packing: Protection Caps in Both Ends, Waterproof Paper Wrapped
A53 carbon steel round bar, also available as cut sheet and plate, is low carbon structural steel complying with ASTM A53 standard. It features good ductility, stable mechanical properties and excellent weldability. It is easy for cutting, turning and cold forming, widely used for pipeline fittings, low-pressure piping components, general structural parts and mechanical processing blanks.
316L stainless steel coil is commonly used in pulp and paper making equipment, heat exchanger, dyeing equipment, film processing equipment, pipes, materials used for the exterior of buildings in coastal areas, as well as watch chains and case of advanced watches.
192 is the steel of carbon structural steel, which is a kind of alloy steel and carbon steel. The carbon content is about 0.05%~0.70%, and some can reach up to 0.90%. It can be divided into ordinary carbon structural steel and high-quality carbon structural steel.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for
drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
Dimension range (OD inch): 1-1/2”----4 1/2”
Dimension range (OD mm): 26.67----114.3
Type of upset: NUE, EUE, Plain end.
Standard: API SPEC 5CT
Main Steel Grade: H40, J55, N80, N80Q, L80, L80-1, L80-9Cr, L80-13Cr, P110 etc.
Type of Tubing: Non-upset tubing (NU), External-upset tubing (EUE), Integrated Joint (IJ).
A106Gr. B Carbon steel round bar
A106 GrB strength grade 415MPa. ASTM A106Gr. B carbon steel round bar is a kind of low carbon steel widely used in petroleum, chemical and boiler industries. The material has good mechanical properties. Carbon steel round bar for high-temperature operation ASTM A106 GR. B, steel grade: SA106B, Specification: 1/4 ″ - 28 ″, 13.7-711.2mm Steel grade: GRAD B, Standard: ASTM A106 - American Society for Testing and Materials.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
A179 carbon steel round bar, also available as cut sheet and plate, is cold-drawn low-carbon steel bar under ASTM A179 standard. It has good ductility, fine cold forming performance and uniform grain structure. It features reliable weldability and machinability, with stable mechanical properties at normal temperature. Widely used for heat exchanger tubes accessories, mechanical processing parts, boiler auxiliary components and general structural elements.
CONTACT US
Xingguang Financial Center, Liaocheng City, Shandong Province
GET A FREE QUOTE