PRODUCT CENTER
310s stainless steel plate is widely used in kiln, high-temperature furnace, boiler, furnace liner high-temperature equipment, such as kiln car, boiler liner, high-temperature furnace, high-temperature furnace tube, combustion machine liner, etc. It can be used for high-temperature equipment. The product is resistant to high temperature and heat. 310s stainless steel plate has good creep strength and can work continuously under high temperature. The working temperature of 310S stainless steel is 1200 ℃, and it can work continuously at 1100 ℃. It is mainly used to manufacture high temperature exhaust pipe, high temperature furnace, high temperature furnace liner, crematory furnace and other steel grades requiring heat resistance, as well as high temperature and high temperature contact parts.
Stainless steel is an alloy of Iron with a minimum of 10.5% Chromium. Chromium produces a thin layer of oxide on the surface of the steel known as the passive layer. This prevents any further corrosion of the surface. Increasing the amount of Chromium gives an increased resistance to corrosion.
Stainless steel plate is made of stainless steel billet through hot rolling or cold rolling, solution annealing, pickling and passivation treatment to make a flat plate. The material contains chromium-nickel alloy elements, forming a stable passivation protective film on the surface.
410 is a basic general-purpose martensitic stainless steel, used for high-stress parts, with good corrosion resistance and high strength and hardness. The alloy 410 contains at least 11.5 percent chromium, which is just enough to exhibit corrosion resistance in mild atmospheres, vapors, and many mild chemical environments.
Q195 galvanized sheet is a surface galvanized sheet with yield strength of 195MPa.
420 is a hardenable martensitic stainless steel that contains at least 12% chromium, just enough to provide corrosion resistance. It has good ductility in the annealed condition, but can be hardened to a minimum Rockwell hardness of 50 HRC, which is the highest hardness in the 12% chromium scale. Due to its hardening properties, 420 are not often welded, although this is possible.
DX51D (European Standard EN 10346) and SGCC (Japanese Standard JIS G3302) are two widely used international standards that specify commercial-grade hot-dip galvanized steel sheets. This product is manufactured by processing a low-carbon steel substrate through a continuous hot-dip galvanizing process, resulting in a steel product coated with a pure zinc layer. It is primarily intended for forming applications rather than structural load-bearing purposes.
Galvanized sheet G550 belongs to high-strength series galvanized sheet, with high requirements for tensile strength and yield strength. Its minimum yield strength is 560Mpa, minimum tensile strength is 650Mpa, and zinc layer thickness is 275g/m2. It has strong corrosion resistance and is mainly used for building structures with high strength requirements, such as Z-shaped steel, C-shaped steel, floor bearing plate, etc.
DX52D (European Standard EN 10346) and SGCD1 (Japanese Standard JIS G3302) are specifications for hot-dip galvanized steel sheets designed for deep drawing and complex forming applications. They feature a low-carbon steel substrate with enhanced formability, coated with a pure zinc layer for corrosion protection. The "D" in both designations signifies their primary use for forming (Drawing).
CONTACT US
Xingguang Financial Center, Liaocheng City, Shandong Province
GET A FREE QUOTE